MEP Electrical

SASHES WITH ROTTEN WOOD, BROKEN JOINTS, OR BROKEN OR LOOSE MULLIONS OR MUNTINS SHALL BE REPLACED. • REPLACEMENT WINDOWS MUST USE THE ENTIRE EXISTING OPENING. WOOD IS PREFERRED AS REPLACEMENT MATERIAL, VINYL IS ACCEPTABLE. • SELECTING CORRECT REPLACEMENT WINDOWS IS KEY TO MAINTAINING THE ARCHITECTURAL INTEGRITY OF THE NEIGHBORHOOD. REPLACEMENT WINDOWS SHOULD MATCH THE HISTORIC WINDOWS THEY ARE REPLACING, IN PATTERN, MULLION AND FRAME SIZE. • EXISTING MASONRY OPENINGS MAY NOT BE ENLARGED EXCEPT TO ACCOMMODATE CONTEMPORARY DOOR DIMENSIONS. IF NECESSARY TO ENLARGE AN OPENING, THE ENTIRE MASONRY OPENING, DOOR AND TRANSOMS MUST BE ENLARGED. THE OPENING MUST BE CUT CLEANLY AND FINISHED AS APPROPRIATE. • WINDOW AND DOOR OPENINGS IN THE FRONT OF THE BUILDING SHALL NOT BE FILLED OR BOARDED. • ENCLOSURES OR SECURITY GRILLES AND SCREENS SHOULD BE AS INCONSPICUOUS AS POSSIBLE AND COMPATIBLE WITH OTHER ELEMENTS OF THE FAÇADE. SOLID OR PERFORATED METAL SECURITY DEVICES ARE NOT PERMITTED. • DORMER WINDOWS ON ROOFS SLOPING TOWARD THE STREET SHALL BE RETAINED AND REPAIRED OR REPLACED IN AN APPROPRIATE MANNER TO PRESERVE THEIR ORIGINAL ARCHITECTURAL DESIGN. • SPECIAL WINDOWS, SUCH AS BAYS, BOXES AND DORMERS, SHOULD BE REFURBISHED WHEN POSSIBLE, AND WHEN NECESSARY REPLACED WITH QUALITY FACSIMILES. • HISTORIC WOOD FRONT DOORS MAY BE REPLACED WITH STEEL DOORS, BUT MUST HARMONIZE WITH THE HISTORIC CONTEXT. BOTH WOOD AND METAL DOORS SHOULD HAVE A PANELIZED APPEARANCE. GLAZING IS ENCOURAGED. " THIS IS BASICALLY A SHELL. THE ROOF AND INTERIOR WALLS HAVE COLLAPSED DUE TO WEATHER AND NEGLECT. FRAMING TO CREATE NEW PARTITION WALLS,FRAME EXTERIOR WALLS, INSTALLATION OF NEW DRYWALL, INSTALLATION OF NEW INSULATION IN THE WALLS (R21 WALLS/R49CEILINGS), 6 FEET WOOD FENCING IN THE REAR,REAR BUMP OUT FOUNDATION 45INSTALLATION OF NEW WINDOWS, DEMO WALLS,INTERIOR DOORS AND EXTERIOR DOORS (WINDOWS AND DOORS, INSTALLATION OF NEW FINISHES HARDWARE,INSTALL CONCRETE IN THE REAR,MASONRY WORK,FRENCH DRAIN TILE ,OF THE HOUSE,ALL WORK WILL BE DONE ACCORDING TO BALTIMORE CITY CODE. SEPARATE PERMIT IS REQUIRED FOR MECHANICAL, ELECTRICAL, AND PLUMBING)